Caratbody 10 ml
In fact, Caratbody 10 ml  is a body filler  based on Patented Micro-beads of Crosslinked Hyaluronic Acid. It is as well useful only for body use. However, they use this product effectively for breast and buttock augmentation.
Patent 3 Staged Microbeads Hyaluronic Acid Cross-linked Technology （Patented MCL * technology）
Caratbody 10 ml is a sterilized product with gel-type, no toxicity by building bridge hyaluronic acid which is extracted from microorganisms.
This bridged hyaluronic acid is provided embedding in a disposable syringe, and must be injected into 1 patient only, and should not be dispensed and injected into 2 persons. The packaging quantity or capacity of the product is specified on outside the packaging box.
Caratbody 10 ml is a disposable sterile medical device, autoclaving (121 ° C, 18 minutes) and should not be reused.
Caratbody applies the patented 3 staged microbead processing technology that allows to increase the viscosity and produce a long-lasting filler. By controlling the cross-linking rate to adjust the viscosity, we are able to produce a wide range of high quality fillers depending on its use.
 
Viscosity
Caratbody applies the unique technology of creating a semi-solid state gel of Hyaluronic Acid. Our product has high cohesiveness and viscosity so when injected it creates a pseudo capsule as an implant form that it is not easily dissolved through natural hyaluronidase by the body (mechanism of long-lasting effect).
 
Longevity
Increased concentration / Increased particle size
Semi-solid Gel type Caratbody
 
Removable
Caratbody has overcome the problems faced by increasing the cross-linking rate, to create a safe and removable product
You don’t have to worry about unsatisfactory results after injection. Caratbody is strong against natural hyaluronidase inside the body, but can be completely removed by injecting hyaluronidase. Then the filler left in the soft tissue can be completely removed. It is easily removed.
 
High hydrophilic capacity
Our product provides excellent volume effect through its high hydrophilic capacity and stable molecular structure even after high cross-linking rate
 
Statement for use & manipulation sequence
1.Check the packaging status and the content of the product.
2.Acquaint enough yourself with the manual.
3.Use sterilized and packaged product.
4.Remove the packaging carefully and take out the syringe.
5.Open the packaging and check the injected capacity in the syringe, and check if any distortion, crack, or damage of the appearance.
6. In order to prevent contamination, select needle syringe which is fit to the position to be injected and open the cap of the syringe, and connect the needle of syringe.
7.This product must be injected into the dermis.
8.Dispose after the use of amount inside the syringe due to the selection of user.
9.For 1.1ml face filler product, Ultra-thin wall 25G 13mm injection needle (with 0.4mm if internal diameter) is recommended in case of the product that does not enclosed a needle.
10.During administration, it is recommended that the bevel of the end of needle should face upward, the shape of the needle can be seen from underneath the skin as the depth of the injection. meanwhile the silhouette of needle under the skin cannot be seen clearly and once the syringe is in place, slowly inject  while insert the needle into the skin as next, withdraw the needle at the same angle as insertion, do not push the plunger during the needle is withdrawn from the skin, to prevent caratbody leaking from the needle point.
To achieve the desired result, the injection should be into the deep dermis. If the injection is too deep or inner layer of the muscle, the hyaluronic acid will be degrades rapidly, causing the duration time to be shortened. If the injection is too light may result in bluish discoloration of the skin or bulging.
11.For 10ml body filler product, it is recommended to use 16 ~ 18G Cannula (Semi-permanent cannula). Insert cannula into the fat layer, then using a controlled shake and turning motion to breaks up the fat tissues and allowing the fat layer to make space before injection.
* For breast augmentation, injection should be done at the top part of breast. Do not inject from the bottom part of the breast, otherwise ptosis or sagging may occur.
HA concentration 20 mg/ml
Ingredient: Sodium Hyaluronate Gel
Injection area: deep dermis, shallow subcutaneous tissue
Storage condition：Store at room temperature
Avoid direct sunlight.
Do not store with freezing.
Shelf life：36 months
 
Disclaimer
Actual product packaging and materials may contain additional and/or different ingredient, nutritional, or proper usage information than the information displayed on our website. You are responsible for reading labels, warnings, and directions prior to using or consuming a product. If you have food sensitivities or allergies, you should always read the actual product labels to confirm the safety of the product for your situation. Content on this website is for general reference purposes only and is not intended to substitute for advice by a physician, pharmacist, or other licensed health care professional. You should not use the information presented on this website for self-diagnosis or for treating a health problem.